iten
Ateneo
iten
Ateneo

Paolo Chiariotti

Paolo Chiariotti
PostDoctoral Researcher

 

Research Areas

Innovative measurement systems and sensors, with particular focus on vibro-acoustic problems. Research interests include non-contact vibration measurements for structural dynamic and NDT, acoustic measurements and simulation, signal processing, machine condition monitoring and software development. Part of this research activity has been carried out within several European projects.

Capsule Bio

Paolo Chiariotti is a Post-Doctoral researcher within the Mechanical and Thermal Measurement Group at DIISM. He graduated in Mechanical Engineering (cum laude) from Università Politecnica delle Marche in 2007 with a thesis entitled “Progettazione funzionale di un sistema antivibrante per la riduzione dell’incertezza di misura nella tecnica LDV: applicazione all’interno di cabina di aereo in volo”. He received his Ph.D. degree in Mechanical Engineering and Management from Università Politecnica delle Marche in 2011 with a thesis entitled “Noise Source Identification: an innovative approach of the Selective Intensity method”.

 

Pubblications

  1. G. M. Revel, P. Chiariotti, E. Copertaro, G. Pandarese, High-resolution infrared cameras for improving defect detection in Pulsed Thermography, Proceedings of AITA 2015 – Advanced Infrared Technology and Applications, Pisa, Italy, September 29 October 2 2015.
  2. G. Accardo, B. Cornelis, K. Janssens, B. Peeters, P. Chiariotti, M. Martarelli, A non-line-of-sight identification algorithm in automatic microphone localization for experimental acoustic modal analysis, Proceedings of INTERNOISE 2015, San Francisco, USA, August 9-12 2015.
  3. C. Colangeli, P. Chiariotti, K. Janssens, P. Castellini, A microphone clustering approach for Improved Generalized Inverse Beamforming formulation, Proceedings of NOVEM 2015, Noise and Vibration Emerging Technologies, Dubrovnik, Croatia, April 13-15 2015.
  4. C. Colangeli , P.Chiariotti, K. Janssens, Uncorrelated Noise Sources Separation Using Inverse Beamforming Experimental Techniques, Rotating Machinery, and Acoustics, Volume 8, Springer International Publishing, Conference Proceedings of the Society for Experimental Mechanics Series 2015, 59-70
  5. P. Chiariotti, G. M. Revel, M. Martarelli, Exploiting Continuous Scanning Laser Doppler Vibrometry and Wavelet Processing for Damage Detection, Experimental Techniques, Rotating Machinery, and Acoustics, Volume 8, Springer International Publishing, Conference Proceedings of the Society for Experimental Mechanics Series 2015, pp 189-196
  6. E. Copertaro, P. Chiariotti, A. A. E. Donoso, N. Paone, B. Peters, G.M. Revel, A discrete-continuous approach to describe CaCO3 decarbonation in non-steady thermal conditions, Powder Technology, 2015, 275, 131 – 138
  7. P. Chiariotti, M. Martarelli, E.P.Tomasini, P. Castellini, Aeroacoustic source localization on open rotor aircraft model in wind tunnel tests, Proceedings of Internoise 2014, 16-19 November, Melbourne, Australia.
  8. M. Martarelli, P. Chiariotti, M. Pezzola, P. Castellini, Delamination detection in composites by laser ultrasonics, Proceedings of 11th International Conference on Vibration Measurements by Laser Techniques, 25–27 June 2014, Ancona, Italy, 1600, 405 (2014); http://dx.doi.org/10.1063/1.4879609
  9. P. Chiariotti, M. Martarelli, G.M. Revel, Exploiting continuous scanning laser Doppler vibrometry (CSLDV) in time domain correlation methods for noise source identification, Measurement Science and Technology, 05/2014; 25(7):075204. DOI: 10.1088/0957-0233/25/7/075204
  10. P. Chiariotti, P. Castellini, M. Martarelli, Recovery of Mode Shapes From Continuous Scanning Laser Doppler Vibration Data: A Mode Matching Frequency Domain Approach, IMAC XXXII -International Modal Analysis Conference, Orlando, Florida USA, February 3-6, 2014.
  11. M. Martarelli, P. Castellini, P. Chiariotti, E.P. Tomasini, Exploiting Imaging Techniques to Overcome the Limits of Vibration Testing in High Excitation Level Conditions, Proceedings of IMAC XXXII -International Modal Analysis Conference, Orlando, Florida USA, February 3-6, 2014.
  12. P. Castellini, P. Chiariotti, E. P. Tomasini, M. Martarelli, D. Di Maio, B. Weekes, D. J. Ewins, Recovery of Operational Deflection Shapes from noise-corrupted measurement data from CSLDV: comparison between polynomial and mode filtering approaches, Proceedings of IMAC XXXII -International Modal Analysis Conference, Orlando, Florida USA, February 3-6, 2014.
  13. M. Martarelli, P. Chiariotti, Envelope Cepstrum Based Method for Rolling Bearing Diagnostics, Proceedings of International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO2013, Ferrara, Italy, May 8-10, 2013.
  14. P. Castellini, P. Chiariotti, M. Martarelli, E.P. Tomasini, Valvetrain motion measurements in firing conditions by Laser Doppler Vibrometer, Proceedings of IMAC XXXI -International Modal Analysis Conference, Orange County, Garden Grove, California USA, February 11-14, 2013.
  15. P. Castellini, P. Chiariotti, M. Martarelli, Mode filtering of Continuous Scanning Laser Doppler Vibration Data, Proceedings of IMAC XXXI -International Modal Analysis Conference, Orange County, Garden Grove, California USA, February 11-14, 2013.
  16. P Chiariotti, M Martarelli, C Santolini, EP Tomasini, Diagnostic procedure on brake pad assembly based on Young modulus estimation, 2013, Measurement Science and Technology 24 025602 doi:10.1088/0957-0233/24/2/025602.
  17. P. Chiariotti, R. Ciarmatori, P. Castellini, A. Bastari, N. Paone, Different configurations of laser vibrometry for quality control of electric motors with external rotor, Proceedings of 10th International Conference on Vibration Measurements by Laser Techniques, 27- 29 Giugno 2012, Ancona.
  18. P. Chiariotti, M. Martarelli, C. Santolini, E.P. Tomasini, Diagnostic procedure on brake pad assembly based on Young modulus estimation, Proceedings of 10th International Conference on Vibration Measurements by Laser Techniques, June 27- 29 2012, Ancona, AIP Conf. Proc. 1457, pp. 344-351; doi:http://dx.doi.org/10.1063/1.4730576.
  19. P. Chiariotti, P. Castellini, M. Martarelli, E.P. Tomasini, Metodi basati su Array di Microfoni per la Localizzazione di Sorgenti Acustiche e il Controllo di Qualità in Ambito Industriale, Proceedings of AIA Seminar “Strumenti e metodi di misura in acustica”, September 7 2012, Ancona
  20. G.M. Revel, M. Martarelli, P. Chiariotti, Spatial Noise Component Identification based on different Vibro-acoustic Data sets, Proceedings of IMAC XXX -International Modal Analysis Conference, Jacksonville, Florida USA, January 30 – February 2, 2012.
  21. G.M. Revel, M. Martarelli, P. Chiariotti, Noise source contribution analysis by Laser Doppler Vibrometer and sound intensity probe, Proceedings of Forum Acusticum 2011, Aalborg, Denmark, 27 June-1 July 2011.
  22. E. Concettoni, C. Cristalli, N. Paone, P. Castellini, S. Serafini, P. Chiariotti, “Diagnostic Robot” For Vibro-Acoustic Measurements In Accelerated Life Tests, Proceedings of ICEDyn2011, Tavira, Portugal, 20-22 June 2011.
  23. P. Chiariotti, M. Martarelli, E.P. Tomasini, Sviluppo di una metodologia di diagnostica per la rilevazione di difetti di motoriduttori ed applicazione in linea di produzione, Proceedings of 8th National Congress of Mechanical and Thermal Measurements, July 5-7 2010, Rome.
  24. G.M. Revel, P. Castellini, P. Chiariotti, E.P. Tomasini, F. Cenedese, A. Perazzolo, Laser Vibrometry Vibration Measurements on Vehicle Cabins in Running Conditions: Helicopter Mock-up Application, Optical Engineering 50, 101502 (Jun 14, 2011), doi:10.1117/1.3578447.
  25. P. Chiariotti, M. Martarelli, E.P. Tomasini, Signal processing techniques for gears quality control and for detecting specific defects, Proceedings of ICSV XVII, June 18-22 2010, IlCairo.
  26. G.M. Revel, P. Castellini, P. Chiariotti, E.P. Tomasini, F. Cenedese, A. Perazzolo, Scanning Laser Doppler Vibrometer Measurements Inside Helicopter Cabins in Running Conditions: Problems and Mock-up Testing, Proceedings of 9th International Conference on Vibration Measurements by Laser Techniques, June 22- 25 2010, Ancona.
  27. P. Chiariotti, M. Martarelli, E.P. Tomasini, P. Castellini, R. Beniwal, Noise source localization on washing machines by conformal array technique and near field acoustic holography, Proceedings of ISNVH VI, June 9-11 2010, Graz.
  28. P. Chiariotti, M. Martarelli, E.P. Tomasini, R. Beniwal, Noise source localization on washing machines by conformal array technique and near field acoustic holography, Proceedings of IMAC XVIII, February 2-4 2010, Jacksonville.
  29. P. Castellini, P. Chiariotti, M. Martarelli, E.P. Tomasini, Vibration and acoustic analysis of brake pads for quality control, Proceedings of IMAC XVIII, February 2-4 2010, Jacksonville.
  30. G.M. Revel, M. Martarelli and P. Chiariotti, A new laser vibrometry-based 2D selective intensity method for source identification in reverberant fields: part II. Application to an aircraft cabin, Measurement Science and Technology 21 075108 doi: 10.1088/0957-0233/21/7/075108, 2010.
  31. G.M. Revel, M. Martarelli and P. Chiariotti, A new laser vibrometry-based 2D selective intensity method for source identification in reverberant fields: part I. Development of the technique and preliminary validation, Measurement Science and Technology 21 075107 doi: 10.1088/0957-0233/21/7/075107, 2010.
  32. G.M. Revel, M. Martarelli, P. Chiariotti, A. Paonessa, 2D-Coherent acoustic intensity measurements for source identification in aircraft cabins, Proceedings of Euronoise 2009, October 26-28 2009, Edimburgo. ISBN: 978-1-61567-680-4.
  33. G.M. Revel, M. Martarelli, P. Chiariotti, A. Paonessa, 2D-Coherent Acoustic Intensity Estimation from Operational Scanning Laser Vibrometry Measurements for Source Identification in Reverberant Fields , Proceedings of IOMAC III 2009, May 4-6 2009, Portonovo, ISBN 978-88-96225-16-5.

Email:
p.chiariotti@univpm.it

Office Phone:
+39 071 220 4441/4145/4976

Room:
Q185_011

Laboratorio vibrometria (Q145)